5. Hard Reset Your Controller . It could also be that your controller has suffered a temporary glitch, and you can fix it with a hard reset. To do that, grab a pointy and thin object, such as a straightened paper clip or toothpick, and insert it into the small hole at the back of your DS4 controller (it's below the Left Trigger button). After that, plug the controller in, boot up your PS4, and see if the controller will take a charge. Power cycle your PS4. If the controller still doesn't charge, then power cycling the console may help. To do this, you need to shut down the console and controller, unplug the console from power, and leave it unplugged for about 20 minutes. Press and hold the PS4 console’s power button while waiting for the second beep sound to play. This could take some time. Remove the power cable. Disconnect the PS4 console’s non-connecting controller as well. Re-insert the power cable after waiting two to three minutes. Additionally, connect the controller to the console, or another one. Take Your Controller A Part and Disconnect The Battery. This is a sort of power cycling your controller. You have to take it apart and disconnect the battery. Leave it like this for 5-10 minutes, and connect it again. This may help fix many problems with the controller, including the sticky blue light. Phone chargers won' t work, it'll charge the controller fine but the cable won't send data to your console which is required to get pass the "press PS button" screen. Bare in mind, if you bought your console second-hand, the previous owner may have sold it with the wrong cable. You can follow the steps below to perform a power cycle. Step 1. Turn off the PS4 console and controller entirely. Step 2. Unplug the main power supply wire from the socket of the console. About 5-10 minutes later, hold the PS4 power button for 30 seconds to drain all the left energy. Step 3. First, turn off your PS4 and unplug it. 2. Find the small reset button on the back of the controller, close to the L2 button. 3. Take a small tool and gently press the button in the small hole. 4. Now, plug in your console, connect your controller with a USB cable, and press the PS button. Make a 50/50 measured solution of isopropyl rubbing alcohol and water. Use a microfiber cloth to slightly dampen with the solution. Use the microfiber cloth towel to wipe around the exterior of .

how to connect ps4 controller to ps4 after reset